POWER TAKE-OFF

POWER TAKE-OFF & SPLIT SHAFT PTO

DOUBLE OUTPUT SPLIT SHAFT - UUR2400

PRODUCT CODE: AKN-SPS-U24

Description:

This Split Shaft PTO is mounted to the Trucks’ drive shaft to give the power to the desired equipment. UUR 2400 is automatic split shaft PTO. Automatic PTO oil ATF should be used. The transition is done by steel and bronze discs to guarantee this process separately by one or two applications. The Vehicle drive shaft should be at rest when the outputs are engaged or disengaged. The below values would be guaranteed, if the right split shaft mounted to the appropriate vehicle.

Technical Data’s
Code : UUR2400
Input Torque for drive flange : 2400 Kgm. or 23535 Nm
Max Continuous load : 23544 Nm
Max momentary load : 31392 Nm
Output Torque : 110 Kgm or 1080 Nm
Oil : 9 LT Automatic transmission oil
Weight : 195 kgs.

Lateral PTO output spec:
Direction of Rotation :Opposite from the engine
Ratio :1 to 1/1.25 -- 1 to 1/1.70 -- 1 to 1
Output Power :115 kW – 155 HP
Control Type : with clutch system and pneumatic rotary
Central Power take of for Service Pump:

Type of Exist :Hydraulic
Number of Exist :2
Max Power :35 kW and 400 Nm
Direction of Rotation :Opposite from the engine
Ratio :1 to 1,62
Rotation (PTO) :Left ( ccw)

 

SINGLE OUTPUT SPLIT SHAFT - UUR3000

PRODUCT CODE: AKN-SPS-U30

 

This split shaft gets the power needed from main shaft to operate the equipments. In UARA 3000 split shaft, SAE 90 full synthetic gearbox oil is used. Engage/Disengage  is done via air bottle with pneumaticaly.This operation, when differantial is disengaged, output shaft can be engaged. It is needed to stop the shaft while the pump engage/disengage  the outputs. If its needed not to stop the shaft,it is necessary that a balance wheel system via disconnector is placed on mechanism. Finally it isn’t necessary that the shaft is stopped.

2.1 Main input-output

Direction of rotation                                               The same with engine

Maximum perpetual relation                                             29430  Nm

Maximum instant relation                                                 44150  Nm

Maximum number of rotation                                           2500 – 3000 dev/dak

 

2.2 Side output

Two Outputs Have Same Torque

Direction of rotation                                                           The same with engine

Availability Rates                                                               1 /1.3 

Using PTO on vehicle                                                       During Idling Speed

Output torque                                                                     3345 Nm

Output power                                                                       350 kw